ISO 15552
Pneumatic fluid power -- Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm -- Basic, mounting and accessories dimensions
气压传动——可拆卸安装件、使用压力1000kPa（10巴）、缸径从32mm到320mm的气缸——基本尺寸、安装尺寸以及附件尺寸。
ISO 15552:2004 established a metric series of basic, mounting and accessories dimensions as required for interchangeability of single- or double-rod pneumatic cylinders, with or without provision for magnetic sensors for a maximum rated pressure of 1 000 kPa (10 bar)
It is applicable to pneumatic cylinders with detachable mountings.
ISO 15552-2004：气压传动中的气缸标准规范。规定了最大使用压力1000KPa(10bar)、内置磁环或不带磁环单杆或双杆气缸，具有互换性所需的公制的基本尺寸、安装尺寸以及附件尺寸。
本标准适用于可拆卸安装件气缸。
ISO 15552 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders.
ISO 15552由技术委员会ISO/TC 131（液体动力系统）的子委员会SC 3（气缸）制定。
This first edition of ISO 15552 cancels and replaces ISO 6431:1992.
ISO15552的第一版标准已经废止。ISO6431:1992已经被ISO 15552替代。
FESTO符合ISO ISO 15552标准的气缸系列：DNC、DNG、DNGZK、DNGZS、DSBC、DSBF、DSBG
SMC符合ISO ISO 15552标准的气缸系列：C96(CP96)
ISO 21287
Pneumatic fluid power -- Cylinders -- Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm .
气压传动——气缸——使用压力1000kPa（10巴），缸径从20mm到100mm的紧凑型气缸。
ISO 21287:2004 establishes a metric series of single rod pneumatic compact cylinders with bores of 20 mm to 100 mm for use of at maximum working pressure of 1 000 kPa (10 bar) with and without magnetic function. This series of pneumatic cylinder is not equipped with adjustable cushioning. Therefore, the application is restricted to those systems where adjustable cushioning is not required.
Cylinders with bores of 20 mm and 25 mm can be used with end cover mountings in accordance with ISO 21287:2004. Cylinders with bores from 32 mm to 100 mm can be used with end cover mountings in accordance with ISO 15552. Piston rod mountings can be used for the different bores in accordance with ISO 8139 and ISO 8140.
ISO 21287 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders.
This International Standard establishes a metric series of single rod pneumatic compact cylinders with bores of 20 mm to 100 mm for use of at maximum working pressure of 1 000 kPa (10 bar1)) with and without magnetic function.
This series of pneumatic cylinder is not equipped with adjustable cushioning. Therefore, the application is restricted to those systems where adjustable cushioning is not required.
Cylinders with bores of 20 mm and 25 mm can be used with end cover mountings in accordance with this International Standard. Cylinders with bores from 32 mm to 100 mm can be used with end cover mountings in accordance with ISO 15552. Piston rod mountings can be used for the different bores in accordance with ISO 8139 and ISO 8140.
（为防原创文章被盗用，此段未翻译。如需了解，请联系气动在线，或在文章下方留言。如需转载，请加气动在线链接。）
FESTO符合ISO ISO 21287标准的气缸系列：ADN、ADNP、AEN、CDC
SMC符合ISO ISO 21287标准的气缸系列：C55
ISO 6432:1985
Pneumatic fluid power -- Single rod cylinders -- 10 bar (1 000 kPa) series -- Bores from 8 to 25 mm -- Mounting dimensions
气压传动——单杆气缸——使用压力10巴（1000kPa）以下——缸径8到25mm——安装尺寸
Establishes metric mounting dimensions for cylinders as required for interchangeability of commonly used hydraulic cylinders. Includes the bore sizes as follows: 8, 10, 12, 16, 20, 25 mm. Gives the following mounting styles: MR3, MP3, MS3, MF8 (tables 2 and 3, figures 2 and 3). Figure 1 and table 1 contain the basic dimensions.
规定了一般用途的气缸，具有互换性所需的公制安装尺寸。缸径包括：8、10、12、16、20mm。安装形式如下：MR3、MP3、MS3、MF8（表2、3和图2和3）。图1和表1包含了规定的基本尺寸。
